
Setting its own antenna and power is how the printer gets the first RFID label right
(Image courtesy of Brady Corporation)
Brady Corporation’s new BradyPrinter i7500 RFID reads the RFID chips in the labels loaded into it and sets its own encoding parameters, which means the first label comes out printed and encoded correctly when Brady’s i75RFID-series rolls are in place. That removes the labels lost to calibration after a consumable change and opens on-premise RFID printing to operators who have no specialist RFID knowledge.
RFID printing that reads its own labels
In Brady’s testing, competitive models waste 10 to 30 labels after each consumable change, against none in calibration for the i7500 RFID with its i75RFID-series rolls. Underpinning that, the printer locates the chips in the loaded labels and chooses the internal antenna and power level to suit, a setting that can otherwise need entering by hand. Brady’s patent-pending technology recognises chips accurately even on labels as small as 15 mm wide and limits void labels as well as time lost in production environments.
Sites can switch between compatible UHF RFID label types on a single printer without losing labels at each consumable change, and because the process needs neither extensive technical expertise nor large amounts of excess labels to write off in calibration, it brings on-premise RFID printing within reach of a wider range of industries.
RFID label printer setup built around uptime
On the floor, the saving starts at setup, which takes under three minutes for large, small, on-metal and off-metal UHF RFID labels, with on-metal labels covered up to 2 mm thick, and which Brady rates faster than most competitive models. Print and encode runs at 3 seconds per label, and the printer is designed to keep lines moving by reducing support interventions, UHF RFID tag scrap, component scrap, unplanned downtime and production bottlenecks.
Verified encoding from pallet labels to component tags
The printer verifies UHF RFID label encoding automatically on everything from large pallet labels to small component tags, while also adding human-readable text and tiny machine-readable QR codes and barcodes for legacy applications, at both 300 and 600 dpi.
Label data can come straight from company systems over Ethernet, USB, Bluetooth and, on wireless models, Wi-Fi, and common data standards can all be printed and encoded, including GS1 standards for RFID EPC codes and item-level barcodes.
Track and trace from the label onwards
The i7500 RFID is the piece that completes Brady’s traceability offer for track and trace with barcodes, RFID or both, sitting alongside an industrial RFID solution that already includes RFID labels, readers and software. With those in place, scans can trigger IoT events and automations, and the combination is aimed at home-in applications on tagged assets, just-in-time tracking, automated inventory and cargo control, and stronger compliance in advanced industrial supply chains.
Digital product passports extend the idea, since the same labelling can link products to their passports and give an asset, item
To find out how Brady may be able to help with your RFID label printing and track and trace requirements, visit the company profile.
