Two feed tubes delivering powder into the hopper of a Readco Continuous Processor during battery material mixing.

Separate feeds meet at the inlet, so fibrillation and mixing start in one continuous pass

(Image courtesy of Readco Kurimoto)

Readco Kurimoto’s Continuous Processor fibrillates PTFE binder and blends it with anode or cathode active materials and additives in a single automated step. The York, Pennsylvania equipment maker says the processor delivers greater efficiency than extrusion on a more compact footprint, and that it has proven itself in operation for a major solid-state battery manufacturer. Production rates reach up to 40,000 kg/hr, even with viscosities exceeding 2,000,000 Cp.

PTFE fibrillation with control over shear and residence time

The processor’s proprietary twin-screw design gives operators control over shear, temperature, residence time, shaft speed and viscosity, so quality targets can be set precisely. In that single step the PTFE powder fibrillates into a stable web that supports a homogeneous mix of carbon black, carbon nanotubes, LFP, NMC, graphite and other dry materials while keeping their structural integrity.

Built for unattended, 24/7 operation, the automated unit feeds materials into an enclosed barrel and disperses them onto a co-rotating twin screw and paddle assembly, which mixes them and advances the batch downstream to discharge on a first-in, first-out basis.

Keeping metal out of the Continuous Processor

Metal particles that end up in a cell’s positive electrode during manufacturing can dissolve and redeposit at the negative electrode, causing internal short circuits that can lead to thermal runaway. The processor’s configuration allows shorter length-to-diameter ratios and shorter residence times than extrusion can manage, and it eliminates the potential for metal-to-metal contact between screw and barrel to prevent metal entrainment contamination. Non-metallic mixing elements are also available in machined ceramic, ceramic-coated or tungsten carbide-coated form to eliminate metal entrainment.

Tested on customer materials before the build

Each Continuous Processor is custom designed and built around testing in Readco’s York laboratory, where trials use the customer’s own materials and formulations to verify performance, with confidentiality assured.

Stay ahead in the electrification revolution. Explore more breakthroughs from leading innovators in electric commercial transport – visit our news page.